Home » Publication » 14350

Dettaglio pubblicazione

2018, MECHATRONICS, Pages 234-247 (volume: 55)

A model-based residual approach for human-robot collaboration during manual polishing operations (01a Articolo in rivista)

Gaz Claudio, Magrini Emanuele, De Luca Alessandro

A fully robotized polishing of metallic surfaces may be insufficient in case of parts with complex geometric shapes, where a manual intervention is still preferable. Within the EU SYMPLEXITY project, we are considering tasks where manual polishing operations are performed in strict physical Human-Robot Collaboration (HRC) between a robot holding the part and a human operator equipped with an abrasive tool. During the polishing task, the robot should firmly keep the workpiece in a prescribed sequence of poses, by monitoring and resisting to the external forces applied by the operator. However, the user may also wish to change the orientation of the part mounted on the robot, simply by pushing or pulling the robot body and changing thus its configuration. We propose a control algorithm that is able to distinguish the external torques acting at the robot joints in two components, one due to the polishing forces being applied at the end-effector level, the other due to the intentional physical interaction engaged by the human. The latter component is used to reconfigure the manipulator arm and, accordingly, its end-effector orientation. The workpiece position is kept instead fixed, by exploiting the intrinsic redundancy of this subtask. The controller uses a F/T sensor mounted at the robot wrist, together with our recently developed model-based technique (the residual method) that is able to estimate online the joint torques due to contact forces/torques applied at any place along the robot structure. In order to obtain a reliable residual, which is necessary to implement the control algorithm, an accurate robot dynamic model (including also friction effects at the joints and drive gains) needs to be identified first. The complete dynamic identification and the proposed control method for the human-robot collaborative polishing task are illustrated on a 6R UR10 lightweight manipulator mounting an ATI 6D sensor.
Gruppo di ricerca: Robotics
© Università degli Studi di Roma "La Sapienza" - Piazzale Aldo Moro 5, 00185 Roma